STM32F1xx_System_Private_Functions

Functions
void	SystemInit (void)
	Setup the microcontroller system Initialize the Embedded Flash Interface, the PLL and update the SystemCoreClock variable.
void	SystemCoreClockUpdate (void)
	Update SystemCoreClock variable according to Clock Register Values. The SystemCoreClock variable contains the core clock (HCLK), it can be used by the user application to setup the SysTick timer or configure other parameters.

Detailed Description

Function Documentation

SystemInit()

void SystemInit

(

void

)

Setup the microcontroller system Initialize the Embedded Flash Interface, the PLL and update the SystemCoreClock variable.

Setup the microcontroller system.

Note

This function should be used only after reset.

Parameters

None

Return values

None

SystemCoreClockUpdate()

void SystemCoreClockUpdate

(

void

)

Update SystemCoreClock variable according to Clock Register Values. The SystemCoreClock variable contains the core clock (HCLK), it can be used by the user application to setup the SysTick timer or configure other parameters.

Update SystemCoreClock variable.

Note

Each time the core clock (HCLK) changes, this function must be called to update SystemCoreClock variable value. Otherwise, any configuration based on this variable will be incorrect.

- The system frequency computed by this function is not the real frequency in the chip. It is calculated based on the predefined constant and the selected clock source:

• If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
• If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
• If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) or HSI_VALUE(*) multiplied by the PLL factors.

(*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value 8 MHz) but the real value may vary depending on the variations in voltage and temperature.

(**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value 8 MHz or 25 MHz, depending on the product used), user has to ensure that HSE_VALUE is same as the real frequency of the crystal used. Otherwise, this function may have wrong result.

• The result of this function could be not correct when using fractional value for HSE crystal.

  Parameters

  None

  Return values

  None